All products

Introducing the Gen3 FermZilla Tr-Conical. Now with 3 Inch Tri-Clover ferrule molded into the tank and redesigned tri-clover dump valve.

These gas manifolds are rated to 100psi and include ball valves that screw into the aluminium extrusion with 1/4inch threads.

These gas manifolds are rated to 100psi and include ball valves that screw into the aluminium extrusion with 1/4inch threads.

These gas manifolds are rated to 100psi and include ball valves that screw into the aluminium extrusion with 1/4inch threads.

These gas manifolds are rated to 100psi and include ball valves that screw into the aluminium extrusion with 1/4inch threads.

This Camlock is the ideal attatchment for your homebrewery hoses (KL06873 Heavy Duty Silicone Hose 12.5x18.5mm). We highly recommend putting this onto the hose instead of the male versions as you can do this with one hand. If you had the female camlock on your brewing vessel you will need to hands to undo it because your other hand needs to pull the hose away.

The days are gone of quick disconnects and their propensity to leak, break and cause havok! Long live CAMLOCKS, after switching over to these you'll never look back. Sturdy 304 Stainless Steel design, and a super seal that will seriously stop anything from leaking out the side and causing a sticky mess. We recommend attaching the male fittings to your vessels and ball valves as it makes it a great deal easier removing hoses and other fittings with the female camlock.

his cap has been designed to be used with our PCO38 Tapping Head for the PET Mini Keg Range, with a specific pressure limit of 35psi / 2.5bar. As it is a standard PET bottle thread (PCO1881) it can also be used on the FermZilla Collection Container / Lid. Please Note: Never exceed the pressure capabilities of your vessel. PRV's are not spunding valves! Check out our blog article explaining this in further detail: Why you should never use a pressure relief valve as a spunding valve.

The Hop Missile can be used either as a Hop Back or an Inline Hop Infuser. The difference being flushing your wort through the Hop Missile back into the boiler, OR as a Hop Inline Infuser flushing the wort through the Hop Missile straight into your fermenter. Either way, you are going to have some serious fun getting a boost of aroma and flavour using this new method of hopping. For all you home hop growers, this is a must-have piece of kit to have to show off the best of your harvest.

his low energy RAPT enabled Bluetooth Thermometer is compatible with the Gen 4 BrewZillas and RAPT Temperature Controllers and RAPT Fermentation Chambers. It will not work without one or more of the devices listed above. https://app.rapt.io/

Made from food grade silicone. Temperature Resistant to 180C. This is a replacement silicone elbow bend. This part joins the pump to the inlet on the base of the robobrew then to the outlet of the pump to the recirculation arm on the side of the Brewzilla

This is a replacement set of 4 adjustable stainless steel clamps to suit the Gen 4 100L BrewZilla only. It will not suit any other BrewZilla, DigiBoil or GrainFather unit.

These 15 Litre wash out kegs are the easiest way to clean out your beer lines AND your keg coupler. Simply fill your washout keg with a mixture of Star San and warm water. Attach your coupler like normal, and open your tap. We recommend letting the mixture sit in the lines for a minimum of 5 minutes. Then flush with water. Type A and D

"It's not how big it is. It's how you use it" Named purely on its looks and not its function. The Hop Bong is a versatile pressurizable tri-clover accessory, capable of not only dry hopping oxygen purged hops into fermenters. But also as an inline carbonation/oxygenation accessory. Capacity in Hop Pellets 150g to 180g

These compression fittings are the most common type to be used with immersion chillers on the market today. We highly recommend using these fittings on any and all immersion / ice bucket chillers to optimize the ability to quicky disconnect the liquid hosing for storage and ease of cleaning.

Stainless Angle / Elbow Male to Female 1/2 inch BSP

Looking for high quaility push in fittings that will seal tight? Duotight are the push in fitting with superior sealing capacity due to the double o-ring sealing design.

Need something to grab onto to pull a beer out of your new bright and shiny new NukaTap tap? Then it sounds like you need the shiny shiny NukaTap Chrome Plated Tap Handle.

Jazz up your Kegerator or commercial beverage dispensary with these stylish decal holders. Made from plated chrome plastic, with soft padding components as to not scratch your taps when attached are surely there to catch your eye. Our decal holders will fit any tap system! Their unique design as to clamp on, means you don't have to take off your tap to put these on. You will need a phillips head screw driver to remove the two screws. As the name says, this will fit a 82mm Diameter Decal/Sticker/Label.

Ideal for cutting hard metal like stainless steel pots and kegs. Drill lubricant should be used to avoid tempering the teel, high pressure and low RPM for best results.

Ideal for cutting hard metal like stainless steel pots and kegs. Drill lubricant should be used to avoid tempering the teel, high pressure and low RPM for best results.

If you want to control the pressure retained in a pressure vessel that is releasing pressure then the BlowTie Diaphram Spunding Valve is the tool for the job.

This collection container fits all the FermZilla Tri-Conical with a 3 Inch x 3 Inch Butterfly Valve. No more threads oil removal tools to get this off, simply depressurise and remove the Tri-Clover fitting. We'd recommend placing a towel or upside down frisby to catch some drips.

This is a complete replacement silicone tubing kit for the pump and ball valve tubing on a 35L Gen 4 BrewZilla. Made from food grade silicone and temperature resistant to 180°C

Glass Bottle 330 ml x 100

Duotight Bottle Filler Beer Gun - Gen2 Have a keg of beer, but want to fill some bottles to take with you to the game, beach, or friend's house? The BeerGun is a great way to fill bottles from a keg. Every part that comes into contact with your beer is stainless steel. This unit features a CO2 purge, which helps to prevent oxidation during filling. These features, coupled with a CO2 jacketing tube for bottle purging and ergonomic valve actuators, makes filling bottles faster, intuitive, more accurate, and easier than ever! Because the Bottle Filler Beer Gun doesn't require a pressurizing stopper, you can fill a bottle of any depth without buying different stem lengths or adding plastic hose extensions. Includes: 1 x Bottle Filler Beer Gun Unit with gas and liquid trigger with silicone tip. Replacement Tips can be found here. 1 x 1/4" x 6.35mm duotight fitting 1 x Red Gas Carbonation Cap x 6.35mm Male duotight fitting (Connect your gas ball lock line directly to the unit, no longer a permanent fitting!) 1 x 1.5-2m Length of 4mm x 8mm EVABarrier Hosing 1 x 8mm Compression x 8mm female duotight fitting Elbow 1 x 8mm duotight x Yellow/Black liquid ball lock disconnect

Chubby - 30L Pressure Fermenter With Spunding Valve And Ball Set. NOW with Stainless Steel Carrying Handles! Looking for an affordable, closed bottom pressure fermenter that will hold a 23L (6 gallon) batch of beer? Just whip out your Chubby and get pressure on your next fermentation. Chubby is perfect for 23-25L batches and still provides plenty of fermenter headspaceDimensions: Height = 595 to top of posts on the lid Width = 300mm round

Now updated with the all new duotight 8mm Ball Lock Disconnect (Grey+Red/Gas) This kit has been designed for simplicity and ease of putting together. This Kit Contains: 1 x KL15042 BlowTie Spunding Valve Gen 2 with 0-15psi Integrated Gauge 1 x KL20756 duotight 8mm (5/16") x Ball Lock Disconnect (Grey+ Red/Gas) 1 x KL18012 Rigid 8mm Plastic Joiner All new compact BlowTie Spunding Valve Gen2 Integrated Kit. If you want to control the pressure retained in a pressure vessel that is releasing pressure then the BlowTie Diaphram Spunding Valve is the tool for the job.

Introducing the Gen3 FermZilla Tr-Conical. Now with 3 Inch Tri-Clover ferrule molded into the tank and redesigned tri-clover dump valve. This unit was born from customer feedback we received on the Gen2 Model. No more complicated dump valve designs here, just simplicity. Brew with confidence on the new Tri-Clover FermZilla Range.

The BrewZilla Gen 4 is designed to be a compact single vessel, double batch all grain home brewing system that can be run off a 15 amp socket. A complete turnkey system with a delay timing feature and step mash functionality. Built to make batches up to 60L, it is the next stepping stone up from the 35L BrewZilla model, being the ideal double batch system for those who want full control of their brew from start to finish.

The BrewZilla Gen 4 is designed to be a compact single vessel all grain home brewing system that can be run off a single 220-240v socket. A complete turnkey system with a delay timing feature and step mash functionality. Built to make batches up to 30L, it is the ideal solution for those who want to take the first step in all-grain brewing while also wanting full control of their batch from start to finish.

This all new ball lock disconnect sets a new bar! The integrated duotight design means you can connect your beer and gas line directly, easily and reliably - no need for additional fittings or clamps. It is a robust and super compact design that is incredibly easy to assemble and disassemble, making cleaning and sanitising an absolute breeze! Made from highly chemical resistant materials with stainless springs and ball bearings - no cheap ABS plastics here - this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitisers and caustics. The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required - no need to ever have blocked poppets again when it is this easy to disassmble and clean. The robust and compact design make this the best value and the best designed home brew quick disconnect ever manufactured. This particular ball lock disconnect has been designed to suit 8mm Beer/Gas Line. Due to the integrated duotight fitting the line will simply push directly into this fitting.

The Stout Spout has a removable creamer/aerator disc inside, it is specially made to serve beers infused with nitrogen gas, and allows the nitrogen gas to flow smoothly through the faucet with the beer to create a smoother, creamier beer. Simply un-screw the regular nozzle and screw on the Stout Spout and use as you would a stout tap.